Advertisement
C. CONNECTION TO ELECTRICAL POWER
WARNING
VALVE AND LIGHT
SWITCHES MUST BE IN
THE OFF POSITION WHEN
CONNECTING UNIT TO
POWER SUPPLY
TO 115V/60HZ WALL RECEPTACLE
NEMA 5-15 R/5-15P
THIS UNIT MUST BE PROPERLY ELECTRICALLY GROUNDED TO AVOID POSSIBLE FATAL
ELECTRICAL SHOCK OR SERIOUS INJURY TO THE OPERATOR. THE POWER CORD IS
PROVIDED WITH A THREE-PRONG GROUNDED PLUG.
IF A THREE-HOLE GROUNDED ELECTRICAL OUTLET IS NOT AVAILABLE, USE AN APPROVED
DO NOT USE EXTENSION CORDS WITH THIS UNIT. DO NOT "GANG" TOGETHER WITH OTHER
1. Connect power supply cord to back of unit as pictured above.
2. Check the unit serial number plate for correct electrical requirements. Do not plug into
electrical outlet unless unit electrical configuration, located on serial plate, agrees with local
available power supply.
3. Route the power supply cord to a grounded electrical outlet of the proper voltage and
amperage rating, and plug in the unit.
4
POWER
INLET
TO POWER
RECEPTACLE
ON UNIT
WARNING
METHOD TO GROUND THE UNIT.
ELECTRICAL DEVICES ON THE SAME OUTLET.
BACK OF UNIT
Advertisement
