Reset Switch; Kensington Lock Slot - Extreme Networks IdentiFi Wireless WS-AP3825i Installation Manual

Reset Switch

The WS-AP3825 provides a Reset Switch to reset or restore factory default configurations.
Use a pen tip or a nail to press the switch button through the hole (located on the top side
of the AP). If you hold down the button for less than 5 seconds, the AP performs a software
interrupt, causing it to drop all connections and reset. If you hold the button down for 5
seconds or more, any configuration changes are removed, and the factory default
configuration restores to the AP.

Kensington Lock Slot

There is a slot for a Kensington lock on the bottom side of the AP. See Kensington lock
documentation for instructions on use of the lock.
Extreme Networks Wireless AP3825 Installation Guide
Introduction
12