Page 1
If you require any help, please contact the customer service department at: Model no. VE08 1-866-474-6664 Version no. 00 Contact us for assistance; we’re here to help.
Table of Contents 1. I ..........................3 mportant recautIons 1.1 D ................................3 efInItIons 1.2 s ..............................3 afety arnIngs 1.3 I .............................5 ntenDeD pplIcatIons 2. s ....................5 afety eatures anD lectrIcal nformatIon 2.1 e ..............................5 xtensIon orDs 3. e ............................6 xploDeD 4. p ..............................6 arts 5.
Important Precautions 1. I mportant recautIons 1.2 Safety Warnings IMPORTANT, RETAIN FOR FUTURE REFERENCE AND READ CAREFULLY! DANGER Do not attempt to install or operate this device until you have read To reduce the risk of fire, electric shock, explosion or injury to the safety instructions in this manual.
Page 4
Important Precautions 1. I mportant recautIons cont 1.2 Safety Warnings (cont.) CAUTION — USE WARNING — INJECTION HAZARD • Learn how to stop the device and release the pressure quickly. Familiarize yourself with the controls. • Equipment can cause serious injury if the spray penetrates •...
Please refer to the icons below for suggested applications. For questions regarding other uses, please refer to WARNING our website at www.simoniz.ca or call us at 1-866-474-6664. • Extension cords are not recommended unless they are IMPORTANT — APPLICATIONS plugged into a ground fault circuit-interrupter (GFCI) found in circuit boxes or protected receptacles.
Item # Part Name Qty. Part # Item # Part Name Qty. Part # Foldable Gun assembly XE03-020-0090 VE08-000-0030 handle Foam blaster XE20-060-0000 Hose reel kit VE08-040-2000 Pressure hose VE15-000-0003 Reel knob VE08-040-0001 Cleaning Pre-attached on the manual Bottle bracket...
Assembly Instructions g 03 5. a ssembly nstructIons 5.1 Surface Preparation 5.4 Assembly Steps Before beginning any cleaning task, it is important to inspect the area for objects that could create a hazard. Remove any objects from the work area that could be tripped over, such as toys or outdoor furniture.
Page 8
Assembly Instructions 5. a (cont.) ssembly nstructIons g 07 5.4 Assembly Steps (cont.) g 06 0° 40° 15° Rotate the nozzle to the predefined spray pattern. Each spray pattern has the following purpose: Attach the high-pressure hose to the gun and pump outlet •...
Page 9
Assembly Instructions 5. a (cont.) ssembly nstructIons g 10 5.4 Assembly Steps (cont.) Attach garden hose to water supply and turn water on. g 09 Plug the unit into an outlet. WARNING Make sure the main switch is in the OFF position. Make sure your hands are dry.
Page 10
Assembly Instructions 5. a (cont.) ssembly nstructIons g 12 5.4 Assembly Steps (cont.) g 11 † Ä PURGING Turn the main switch to ON position and the pressure washer is ready to operate. Purge air by squeezing the trigger on the gun until there is a steady stream of water.
Operating Instructions 6. o peratIng nstructIons 6.1 Working with Foam Blaster Working with a detergent ensures quick soaking of the dirt and allows the high-pressure water to penetrate and remove the dirt g 13 more effectively. Always spray detergent on a dry surface; do not pre-soak the area.
Operating Instructions 6. o (cont.) peratIng nstructIons 6.4 Warnings 6.2 Shutting Down and Cleaning Up CAUTION (Skip this step if you are not using detergent.) When you finish using the detergent injection system, Failure to clean this product properly will cause the detergent fill the detergent container with clean water.
Winterizing and Long-Term Storage 7. w InterIzIng and torage 7.1 Optimum Winterizing Procedure CAUTION g 14 Winterizing your pressure washer will help protect and prolong Drain any remaining water from the gun assembly. Aim the its life. We strongly recommend you follow the below steps using gun downwards and pull the trigger.
Cleaning and Maintenance / Technical Specifications g 15 8. c leanIng and aIntenance 8.1 Connections 8.3 Water Filter Screen The connections on the pressure washer’s hoses, gun, and spray wand should be cleaned and lubricated with non-water soluble grease regularly. 8.2 Cleaning the Nozzles Clogging of the nozzle causes the pump pressure to be too high, making it necessary to clean the nozzle immediately.
Troubleshooting 10. t roubleshootIng Disconnect the device from the power source before making any Problem Cause Solution repairs. Output pressure Not enough inlet Turn faucet on fully. fluctuates high water supply. Check garden hose Problem Cause Solution and low. for kinks, leaks or The On/Off switch is The motor does Turn the switch to...
Page 16
Motor hums but Supply voltage Verify that only the fails to run. below minimum. pressure washer is running on this circuit. IF YOU ENCOUNTER ANY ADDITIONAL DIFFICULTIES NOT LISTED, VISIT OUR WEBSITE AT WWW.SIMONIZ.CA OR CALL CUSTOMER SERVICE FOR HELP AT 1-866-474-6664.
The warranty is void if the equipment is used for commercial, rental or industrial purposes. If you have further questions, please visit our website (www.simoniz.ca) or call 1-866-474-6664. Imported by Trileaf Distribution Trifeuil, Toronto, Canada M4S 2B8...
Do not use the device in rain to avoid fatal electric shock. isk of Injury Do not direct the water ow at people to avoid serious injury. Risk of Electric Shock Never spray water towards any electical devices. 039-8070-4 ENGLISH VE08 039-8050-2 ENGLISH VE15...
Need help?
Do you have a question about the VE08 and is the answer not in the manual?
Questions and answers