DPB-600
4-4 Reassembling motor (Service hint)
A
P
N
B
R
FAN CASE
1. When installing stator assy, place the motor
case on the flat place with making the bottom
section upward, and push it in the arrow direction
by tapping lightly with plastic hammer.
Note : Attach the projection part (A) and (B) of
stator assy so that these match the notch part of
the motor case as shown.
(A) : Wide
(B) : Narrow
2. Attach rotor assy (P) straightly to motion case lid
(N) without tilting it.
17