6
2-2 Disassembling trigger switch grip (Continued)
D
E
F
G
E
F
L
N
K
J
H
HANDLE GRIP
C
D
D
E
G
M
2. Remove the throttle trigger (C).
3. If control board (D) and switch (E) are damaged,
remove and replace the lead terminal (F) and (G)
with new one.
4. Remove terminal(F) and (G) from switch(E) and
assembly control board (D).
5. If throttle lever (N) is damaged, remove torx bolt
(H), spring washer (J), washer (K), (L) locknut (M)
and throttle lever (N). Replace damaged parts with
new one.
DPB-600