Table of Contents
Advertisement
12. CENTERING (Cont.)
When Centering the Entire Image of an Original
4
Place the original on the glass face down
with its bottom toward you and with its
top left aligned against the original scale
on the left side.
5
Press the BASIC key to return to the Basic
menu, then select the desired copy size,
image density level, copy quantity, etc. if
necessary.
Tip:
If the setting of original size and copy size
is not appropriate, the image may not be
copied completely.
6
Press the START key.
When Centering a Part of an Original
4
Place the original on the glass face up with
its bottom toward you and with its top left
aligned against the original scale on the
left side.
5
Following the "Specifying an area" on page
84, key in the size of the area to be centered
with the digital keys, then press the SET
key.
6
Place the original on the glass face down
and with its bottom toward you and with
its top left aligned against the original
scale on the left side.
7
Select the desired copy size, image density
level, copy quantity, etc. if necessary.
Tip:
If the setting of original size and copy
size is not appropriate, the image may
not be copied completely.
8
Press the START key.
90
Advertisement
Table of Contents
