Non-Sort Copying; Non-Sort Copying - Lanier 5722 Operator's Manual

2. NON-SORT COPYING

1 Check that NON-SORT, NON-STAPLE is
displayed on the Basic menu.
● If SORT , GROUP
displayed, press the key and select NON-
SORT, NON-STAPLE .
2
Place the original(s) on the original feed
tray or on the glass.
● See page 22 for how to set the original.
3
Key in the desired copy quantity.
● When 250 or less is copied at a time, all the
copies will exit into the non-sort bin.
When you use the optional automatic
document feeder, the total number of copies
(the number of originals X copy quantity)
should be 250 or less.
● When more than 250 is copied at a time, the
specified number of copies will exit into sort
bins "1" up to "20", then the remaining copies
will exit into the non-sort bin.
● If more than 850 (LT) or 750 (LD/LG/LT-R) is
copied at a time, the copier automatically
stops when 850 (or 750) copies have been
completed, and the following message
appears:
Remove paper from sorter bins ,
Remove all the copies from the sorter and
press the START key again to continue.
4
Select the desired copy size, reproduction
ratio, image density level, etc. if necessary.
5
Press the START key.
Note: When the sorter is working, do not touch
the bins.
or STAPLE SORT is
Paper size Sort bins
Letter 1st~600th copy 601st~850th copy
(30 copies/bin)
Ledger, Legal 1st~500th copy 501st~750th copy
Letter-R (25 copies/bin)
Non-sort bin Total
850 copies
750 copies
123