Table of Contents
Advertisement
10. BYPASS COPYING (THICK PAPER/OHP FILM) (Cont.)
Thick Paper
Tips:
● Use the recommended thick paper and sticker
labels if possible. Thick paper sold at stores
is also available for this copier, but paper of
some brands may not be suitable to acquire
a clear image. In this case, ask your service
technician.
● Due to the image quality adjustment, it takes
a few minutes to switch between "PLAIN" X
"Full Bleed (12"X18")" X "OHP FILM" X
"THICK1" and "THICK2" X "THICK3".
4
Check the type of the thick paper and press
the THICK1 , THICK2 or THICK3 key.
Tips:
● For bypass copying mode for thick paper and
sticker labels, see the table on page 19.
● The thick paper mode cannot be combined
with Full Bleed (12"X18") mode.
44
Advertisement
Table of Contents
