Preface - Lanier 5722 Operator's Manual

PREFACE

Thank you for purchasing the Toshiba Digital Color Copier FC22. This Operator's Manual describes the
following:
• how to use the digital color copier
• how to make copies
• how to inspect and carry out maintenance on the digital copier
• how to remedy mechanical and copying problems.
Before using the digital color copier, thoroughly read and understand the Operator's Manual. To ensure
that clean copies are made at all times and to make sure that the digital color copier is in optimum
working order, keep this Operator's Manual in a handy place for future reference.
To ensure correct and safe use of the Toshiba Digital Color Copier FC22, this Operator's
Manual describes safety precautions according to the following three levels of warning:
The meanings of these signal words are as follows. Before reading this Operator's Manual, you
should fully understand the meaning and importance of these signal words.
Warning ------ Indicates a potentially hazardous situation which, if not avoided, could result in
death or serious injury, or serious damage or fire in the equipment or surrounding
assets.
Caution ------- Indicates a potentially hazardous situation which, if not avoided, may result in
minor or moderate injury, partial damage of the equipment or surrounding
assets, or loss of data.
Note ------------ Indicates a procedure you should follow to ensure the optimal performance of
the digital color copier and problem-free copying.
Tip -------------- Describes handy information useful to know when operating the digital color
copier.
Advice --------- Describes an operation you should follow to maintain the digital color copier in
good working order.
User Safety
This Toshiba digital color plain paper copier does not produce laser radiation hazardous to the user. It
is certified as a Class 1 laser product under the U.S. Department of Health and Human Services (DHHS)
Radiation Performance Standard according to the Radiation Control for Health and Safety Act of 1968.
Protective housing and external covers completely confine the laser light emitted inside the plain paper
copier. The laser beam cannot escape from the machine during any phase of user operation.
Regulations implemented on August 2, 1976 by the Bureau of Radiological Health (BRH) of the U.S. Food
and Drug Administration apply to laser products manufactured from August 1, 1976. Laser products
marketed in the United States must comply with these regulations.
CAUTION: Using controls or adjustments or performing procedures, other than those specified
herein may result in hazardous radiation exposure.
COPYRIGHT 1999
TOSHIBA TEC CORPORATION
1