Table of Contents
Advertisement
9. TRIMMING/MASKING (Cont.)
Following the method of specifying areas
5
on page 84, key in the size of the area to
be trimmed or masked with the digital
keys, then press the SET key.
6
Place the original on the glass face down
with its bottom toward you and with its
top left aligned against the original scale
on the left side.
7
Select the desired copy size, image dinsity
level, copy quantity, etc. if necessary.
Tips:
● If the setting of original size and copy size
is not appropriate, the image may not be
copied completely.
● In bypass copying, the copy size must be
specified.
8
Press the START key.
● Trimmed or masked copies exit from the
copier.
86
Advertisement
Table of Contents
