Table of Contents
Advertisement
7. DUPLEX COPYING (Cont.)
3
Press the EVEN or ODD key according
to the number of originals.
When you do not know the number of originals,
set them on the reversing automatic document
feeder and press the Original Count key. The
number of originals will be automatically
counted.
4
When the copier has finished counting
the originals, reset them on the original
feed tray and press the SET key.
5
Select the desired copy size, image density
level, reproduction ratio, copy quantity,
etc. if necessary.
6
Place the originals.
● See page 22 for how to set the originals.
Note: Remove any paper clips or staples from
originals before placing them on the
original feed tray.
● When originals are to be placed horizontally
(Ledger, Legal, Letter-R and COMP), invert
the odd-numbered and even-numbered
originals relative to each other as shown
before setting them.
7
Press the START key.
● Duplexed copies are output.
74
Advertisement
Table of Contents
