Table of Contents
Advertisement
10. BYPASS COPYING (THICK PAPER/OHP FILM) (Cont.)
Tips:
● Use the recommended OHP films (LT only).
Using other kinds of OHP films may cause
jams and copier failure, and image quality
may be lowered as well and copies cannot
be made in clear color. If you want to use
the other kinds of OHP films, ask your service
technician.
● Set the OHP films on the sheet bypass
vertically (same as LT placement).
If you set them horizontally (same as LT-R
placement), the following message will
appear:
Set transparency film LT direction
● If you select the OHP Film mode, the copy
speed becomes slower.
4
Press the OHP FILM key.
5
Letter is automatically selected for the
copy size.
6
Set the copy quantity.
Tip:
Up to 20 OHP films can be set at a time.
If you will make copies of more than 20
films, feed them from the exclusive cassette
for OHP (see page 48).
7
Press the START key.
46
OHP Films
Slides
Advertisement
Table of Contents
