Before you use the Product for the first time, charge the battery for at least 1.5 hours. The battery status shows
on the five-segment charge indicator.
1. Connect one end of the USB cord into the USB port on the Product and the other end into a USB port on a
PC.
2. Charge until the charge indicator,
3. Disconnect the USB cable when the battery is fully charged.
To prevent damage to the Product:
•
Always operate in the specified temperature range.
•
Do not attempt to charge the batteries in extreme cold environments.
Do not incinerate the Product.
Radio Frequency Data
See Table
8
for instructions on how to access digital copies of the Certificate IDs on the Product.
To view the Radio Frequency Data Class B Instruction Sheet, visit http://us.fluke.com/usen/support/manuals.
Specifications
Complete specifications are at www.fluke.com. See the PTi120 Product Specifications.
, on the display does not flash.
W Caution
W Caution
~
Pocket Thermal Imager
Radio Frequency Data
17