Operation - Westfalia 64 16 05 Instructions Manual

Intended Use
You can finally work on all those awkward corners, edges, gaps, recesses or
other hard to reach areas with this power file. The power file is equipped with
2 interchangeable grinding arms
(8 mm or 13 mm width). The machine is ideal for grinding, filing, removing rust
of a variety of materials like wood, ceramic, metal, plastic or glossy surfaces.
With the speed regulator you can select the correct speed required for the item
you are working on.
Please read the safety instructions!
These instructions will make it easier for you to handle the device appropriately
and help prevent misunderstandings and possible damage or injury.
Before first Use
Remove the angle grinder and the accessories for the packaging. Keep
packaging material out of reach of children. There is risk of suffocation!
Assembling
The power file is delivered partly assembled to ensure
transport. The power file is equipped with 2 interchangeable
grinding arms of 8 and 13 mm width.
For assembling the power file, proceed as follows:
1. Insert the regulating turn knob (7) from the right side into
the sanding arm holder (10) and the black spring from the
left side into the provided notch.
2. Attach the sanding arm (3) to the holder and tighten with
the regulating turn knob. In the sanding arm you will find
the suitable thread for the turn knob.
3. Lightly press the sanding arm holder and the sanding arm together in order
to tighten the regulating turn knob.

OPERATION

12