Dantherm CDT 90 Service Manual page 59

Accessories
Introduction
Further information about each separate accessory is available on request to Dantherm
Air Handling A/S.
List
Below you will find a complete list with drawings, description and article numbers of
accessories available for the CDT dehumidifiers:
Hygrostat
Tap and
screwed hose
connector
"Do-it-yourself"
condensate
pump kit
Water tank fitted
with condensate
pump
Wall bracket
Alarm and error
surveillance
Accessory Illustration
-
Description
When a hygrostat is con-
nected the dehumidifier
can operate continuously
dependent on the relative
humidity in the room.
The hygrostat is available
in two versions:
Hygrostat with 0,4 m cable,
jack plug and fitting
Hygrostat with 3 m cable
and jack plug
Ball tap and brass
screwed hose connector
and clamp for direct drain
of condensate water
Using a condensate pump
you do not have to empty
the water tank
Using a condensate
pump you do not have to
empty the water tank
Using the wall bracket the
dehumidifier can be hung
on the wall
Alarm/error surveillance
can be connected to ter-
minal 11/12 on the unit.
See more in the wiring
diagram page 156
CDT type
Art. No.
All 396242
All 396241
All 396243
CDT 396252
20/30/30S/
40/40S/60
CDT 396253
20/30/30S
CDT 396254
40/40S/60
CDT 396247
20/30/30S
CDT 396248
40/40S/60
All -
59