Specifications - Kanto YU User Manual

Specifications

Nominal Impedance
Total Harmonic Distortion
Crossover Frequency
Frequency Response
Input Voltage / Frequency
Standby Power Consumption
Dimensions (each speaker)
Net Weight (Active)
Net Weight (Passive)
NOTICE: The Bluetooth
SIG, Inc. and any use of such marks by Kanto Living Inc. is under license.
NOTICE: Qualcomm
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other
countries. aptX™ is a trademark of Qualcomm Technologies International, Ltd., registered in the
United States and other countries.
NOTICE: This appliance is labeled in accordance with European Directive
2002/96/EC concerning waste electrical and electronic equipment (WEEE). This
label indicates that this product should not be disposed of with household waste.
It should be deposited at an appropriate facility to enable recovery and recycling.
Tweeters
Woofers
Amplifier Type
Power Output
Input Sensitivity
Crossover System
Inputs
Outputs
Speaker Terminals
Remote
Gross Weight
word mark and logos are registered trademarks owned by Bluetooth
®
aptX™ is a product of Qualcomm Technologies, Inc. and/or its subsidiaries.
1 inch Silk Dome
4 inch Kevlar®
4 Ohm
Class D
140 Watts Peak
560 mV
< 0.25%
2-way
2.0 kHz
60 Hz – 20 kHz
1 x RCA L/R
1 x Bluetooth 4.2 with Qualcomm aptX™
®
1 x Subwoofer
Left and Right Binding Posts
AC 100 V - 240 V 50 / 60 Hz (auto switching)
< 0.5 W
Included
W 5.5"x H 8.7" x D 7.5" (140 x 220 x 190 mm)
6.2 lb (2.8 kg)
5.3 lb (2.4 kg)
14.6 lb (6.6 kg) (boxed pair)
®
11