Subscribe to Our Youtube Channel
Related Manuals for Episode ECA-70VMINI-60W
Summary of Contents for Episode ECA-70VMINI-60W
- Page 1 INSTALLATION MANUAL ECA-70VMINI-60W ECA-70VMINI-60W VOLUME 12VDC IN BALANCED IN STEREO IN UNBALANCED IN SERVICE STATUS RS-232 SPEAKER OUTPUTS L+ L- GND R+ R- S GND GND Tx...
- Page 2 page | 2 CAUTION Risk of Electrical Shock! DO NOT OPEN! ATTENTION ! RISQUE DE CHOC ! ÉLECTRIQUE PAS OUVRIR ! The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
-
Page 3: Multiple Inputs
IR or RS-232) or summed (default). Compact Size and Layout The Episode Mini-amplifier is designed to be tucked away for great looking and sounding installations. With compact controls, efficiently placed connections, this amp is ready to perform without having to be seen. - Page 4 page | 4 AMPLIFIER UNBALANCED IN VOLUME 12VDC IN BALANCED IN SERVICE RS-232 SPEAKER OUTPUTS STEREO IN STATUS L+ L- GND R+ R- S GND GND Tx A. 12V DC Input (Black) Attach 12V DC power from power supply. B. Balanced Input 1 Set screw connector accepts and secures balanced line level mono or stereo audio signals.
-
Page 5: Power Supply
The total 12VDC current is 2A maximum. There is a maximum of 200mA available for the other two 12V outputs for accessories when used together with the amplifier. Only one amplifier can be connected to the power supply. © 2015 Episode® © 2015 Episode®... - Page 6 • When placing on a cabinet shelf, position the unit with all feet resting on a solid, level surface. Minimum of 5" or free air space above Minimum of 3" of free air space 3" 3" on each side. ECA-70VMINI-60W Minimum of 2" of depth behind unit to accommodate cables and connectors.
-
Page 7: Wall Mount Installation
WARNING: Do not stack anything on top of the amplifier. Plenum Placement The ECA-70VMINI-60W amplifier meets UL 2043 requirements for heat and smoke release. It can be installed in the plenum space, such as in the ceiling, out of sight. - Page 8 page | 8 CONNECT CAUTION: All connections and switching must be done with the amplifier turned off. Connect the power cord last to ensure that the amplifier is off during connection and set up. Power Control System Source AC Outlet •...
- Page 9 To configure the amplifier, connect a control system via IR or RS-232 to send the desired command codes. Control protocols are available for download on the ECA-70VMINI-60W product page. Follow the control system manufacturer instructions to configure commands for use.
-
Page 10: Reset Configurations
• Auto ON/OFF Enabled Firmware Update The ECA-70VMINI-60W amplifier may be serviced for firmware updates via a USB memory stick loaded with firmware provided on the product page’s support tab. Visit the product web page for access to support materials and firmware information. -
Page 11: Specifications
T1A L 250V Dimensions: 9”W x 6.4”H x 1.75”D (without mounting ears) 10”W x 6.4”H x 1.75”D (with mounting ears) Weight 5 lb. Certification TUV under UL 60065; UL 2043, plenum rated (amplifier only) © 2015 Episode® © 2015 Episode®... -
Page 12: Year Limited Warranty
SIDE WARRANTY 2-Year Limited Warranty Episode® Amplifiers have a 2-Year Limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products that have been abused, modified or disassembled.
Need help?
Do you have a question about the ECA-70VMINI-60W and is the answer not in the manual?
Questions and answers