Tennant ATLV 4300 Instruction Bulletin page 4

12.(Machines S.N. 000000 -- 001741) Mount the plastic
filter housing (1) to the mounting brackets, (27) and
(28), with hex screws (31) and mounting strips (30).
(Refer to FIG. 6)
13.(Machines S.N. 000000 -- 001741) Mount the support
brackets (35) and (36) to each side of the plastic filter
housing (1) with hex screws (23). (Refer to FIG. 6)
(Machines S.N. 001741 -- xxxxxx) Mount the support
brackets (42) and (43) to each side of the plastic filter
housing (1) with hex screws (23). (Refer to FIG. 6)
14.(Machines S.N. 000000 -- 001741) Using the support
brackets (35) and (36) as templates, mark and drill
two 11/32 [8.73 mm] mounting holes for the support
brackets in each side of the debris hopper.
(Refer to FIG. 6)
(Machines S.N. 001741 -- xxxxxx) Using the support
brackets (42) and (43) as templates, mark and drill
two 11/32 [8.73 mm] mounting holes for the support
brackets in each side of the debris hopper.
(Refer to FIG. 6)
15.(Machines S.N. 000000 -- 001741) Secure the support
brackets to each side of the debris hopper with
backing strips (37) and lock nuts (24).
(Refer to FIG. 6)
4
24
37
IB 340133 (10-02)