Setting The Head-Tilt Angle - Oregon 730-120 Original Instruction Manual

730-120
5. Make sure the grinding wheel edges match
the shape of the chain type.
• For ceramic grinding wheels: Use the
profile stone (included in delivery) to
shape the edges on the grinding wheel.
Use a light-sweeping action to shape the
edges of the wheel. Use the provided
template to verify proper radius shape for
the specific grinding wheel being used
6. Set the grinding wheel switch to OFF.
7. Use the profile template to verify that the
grinding wheel has the same profile as the
type of chain to be sharpened.
8. Repeat steps 5-7 until the grinding wheel
profile is the same as the selected profile
on the profile template.

5.2.2 Setting the head-tilt angle

Note: Read the specifications from the chain
manufacturer to find out the recommended
head-tilt angle for your chain.
1. Use an adjustable wrench to loosen the
head-tilt angle nut located on the back of
the machine.
.
2. Turn the grinding head to set the desired
head-tilt angle (50-90°) on the head-tilt angle
scale. The default head-tilt angle is 60°.
3. Tighten the head-tilt angle nut
Operation
.
25