Important Instructions - ABB i-bus EIB Series Operating Instructions Manual

Important instructions

GB
When planning and erecting electrical systems the
relevant standards and regulations applicable in the
country where the equipment is set up and operated
must be duly observed.
Work on the 230V-mains system and EIB bus must
exclusively be performed by trained electrical
personnel. Laying and connection of the bus line as
well as application devices must be in conformity with
applicable guidelines specified in the EIB Manual of
the European Installation Bus Association (EIBA).
The devices are to be programmed using ETS2 (version
1.1 or higher).
Please make sure the ambient conditions suited for
the safety class and permissible operating tempe-rature
(see "Technical Data") are met.
Please note that this watchdog is not meant to function
as burglary or invasion alarm system since it is not
adequately protected against acts of sabotage as
prescribed.