Operating Modes / Settings - ABB i-bus EIB Series Operating Instructions Manual

Operating Modes / Settings

The following settings can be made on the unit:
– Response Threshold
– Cutout Delay
– Mode of Operation
The response threshold and cutout delay may also be set
via parameterization using ETS2; settings on the unit (see
Fig.1, Item 4 a ... c) will modify the function of the
watchdog.
The following operating modes can be set locally on the
unit (see Rotary Button, Fig.1, Item 4b):
S
N
T
Prog.
Test (T): Operating mode to determine the coverage zone
(irrespective of the response threshold adjusted)
Prog.: Operating mode for programming the unit
Normal (N): Unit operates with adjustable
response threshold and cutout delay
Standard (S): Unit operates with fixed
response threshold (5 Lux) and cutout delay
(3 minutes)
GB