Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Microtec Manuals
  4. Power Tool
  5. MAX-Hover Series
  6. Manual

Microtec MAX-Hover Series Manual

Auto open heat press
Hide thumbs

Advertisement

Quick Links

Download this manual
CONTENTS
I.
Assembly Drawing ------------------------------------------------------------------------------2
II.
Technical Parameters --------------------------------------------------------------------------2
III. Operation Process ------------------------------------------------------------------------------3-6
IV. Maintenance ---------------------------------------------------------------------------------------7
V.
Trouble Shooting For Transfer Print Quality--------------------------------------------7
VI. Circuit Diagram -----------------------------------------------------------------------------------8
VII. Explosion View -----------------------------------------------------------------------------------9-10
Auto Open Heat Press Manual
Model No.: MAX-HOVER
- 1 -

Advertisement

loading
Need help?

Need help?

Do you have a question about the MAX-Hover Series and is the answer not in the manual?

Questions and answers

Related Manuals for Microtec MAX-Hover Series

Summary of Contents for Microtec MAX-Hover Series

  • Page 1: Table Of Contents

    Auto Open Heat Press Manual Model No.: MAX-HOVER CONTENTS Assembly Drawing ------------------------------------------------------------------------------2 Technical Parameters --------------------------------------------------------------------------2 III. Operation Process ------------------------------------------------------------------------------3-6 IV. Maintenance ---------------------------------------------------------------------------------------7 Trouble Shooting For Transfer Print Quality--------------------------------------------7 VI. Circuit Diagram -----------------------------------------------------------------------------------8 VII. Explosion View -----------------------------------------------------------------------------------9-10 - 1 -...

  • Page 2: Assembly Drawing

    I. ASSEMBLY DRAWING ① ② ③ ④ Electrical Case -06 Digital Controller Limit Switch Electromagnet Suck Plate ⑤Pressure Adjust Knob ⑥ ⑦ Emergency Stop Button Power Switch II. Technical Parameters 1. Model No.: MAX-HOVER 2. Machine Size: 770*440*445mm 3. Printable Articles Max Size :400*500*10 mm 4.

  • Page 3: Operation Process

    III. Operation Process Machine Main Function 1. When the vice magnet attach to the electromagnet, the height between heat platen and under plate is 10mm, then you can cure the ink for T-shirt 2. When the main magnet attach to the electromagnet directly, you can use this machine as a normal heat press to transfer the T-shirt etc.
  • Page 4 - 4 -...
  • Page 5 GY06 Digital Controller Operation Process 1. Set temperature required Turn on power switch, temperature Press button, the temp light Press button, the light is light is ON. The digital display shows on (C denotes Celsius). Press is on. Select with arrows the arrows “△”...
  • Page 6 When SV and PV has a big difference, When the temperature shows on the display is not the same as actual press button for 5 seconds, and press button again to adjust the temperature. temperature on heat platen, press If SV&PV has difference of 20 degrees, button for 5 seconds to reset mode: When display shows 200°C,the actual Press arrows “△”...
  • Page 7 step 6: When the temperature rises to the set temperature, the buzzer sends out a sound; then close down heat platen(meantime the sounds stop) and starts to transfer. step 7: Time is counting down; once time is up, the buzzer will send out a sound again, the heat platen will open automatically (meantime the sounds stop).

  • Page 8: Maintenance

    IV. Maintenance 1. No action after turn on the machine 1). Check the plug whether it connects well or whether it is broken. 2). Check the power switch or digital controller whether it is broken. 3). Check the fuse whether it has been burnt out. 4).

  • Page 9: Circuit Diagram

    Circuit Diagram Ko.: Power switch M: Electromagnet K1: Limit Switch T: Transformer FU: Fuse R1: Relay EH1 EH2: Heating Pipe T: Transformer SJ: Digital Controller A-B: Thermocouple P: Urgent Pause - 9 -...

  • Page 10: Explosion View

    VII. Explosion View - 10 -...
  • Page 11 Electromagnet Serial No. Part Name Machine Foot GY-06 Digital Controller Under Plate Fitting Limit Switch Under Plate Electronic Box Heat Platen Back Cover Heat Platen Metal Cover Fuse Holder Anti-scald Protect Cover Power Cord Heat Platen Adapter Plate Power Switch Emergency Stop Button Serpentuator Cable Sheathh Davit Arm...