Advertisement
Plain Heat Press Manual
Model. No.: SHT-15/20/24LP1
CONTENTS
I. Assembly Drawing -----------------------------------------------------------------------------------2
II. Technical Parameters ------------------------------------------------------------------------------2
III. Operation Process -------------------------------------------------------------------------------3-4
IV. Maintenance ------------------------------------------------------------------------------------------5
V. Trouble Shooting For Transfer Print Quality-----------------------------------------------5
VI. Circuit Diagram -------------------------------------------------------------------------------------6
VII. Explosion View ----------------------------------------------------------------------------------7-8
- 1 -
Advertisement
Table of Contents
Related Manuals for Microtec SHT-20LP1
Summary of Contents for Microtec SHT-20LP1
- Page 1 Plain Heat Press Manual Model. No.: SHT-15/20/24LP1 CONTENTS I. Assembly Drawing -----------------------------------------------------------------------------------2 II. Technical Parameters ------------------------------------------------------------------------------2 III. Operation Process -------------------------------------------------------------------------------3-4 IV. Maintenance ------------------------------------------------------------------------------------------5 V. Trouble Shooting For Transfer Print Quality-----------------------------------------------5 VI. Circuit Diagram -------------------------------------------------------------------------------------6 VII. Explosion View ----------------------------------------------------------------------------------7-8 - 1 -...
- Page 2 I. Assembly Drawing ○ ○ ○ ○ Temp Controller Pressure Adjuster Time Indicator Light Time Controller ○ ○ ○ ○ Power Switch Fuse Power Cord Under Plate Stander II. Technical Parameters 1. Model No.: SHT-15/20/24LP1 2. Machine Dimensions: 395*595*600mm 3. Heat Platen Size: 38x38cm/ 40x50cm/ 40x60cm 4.
- Page 3 III. Operating Process 1. Set temperature required Turn on power switch, the green light It shows Centigrade Degrees. The temperature is rising now. on, and temperature display shows Press ‘’－‘’ or “+” button to set –L-, and the temperature goes rising. the temperature you need.
- Page 4 platen (meantime the sounds stop). Step 6: Work finish and take out the object. If you want to print on another object, place the object on press bed and confirm the TIME and TEMPERATURE set as last time, then repeat above process. Unplug the power cord when is machine is not in use.
- Page 5 IV. Maintenance 1. No action after turn on the machine 1). Check the plug whether it connects well or whether it is broken. 2). Check the power switch or temp. & time controller whether it is broken. 3). Check the fuse whether it has been burnt out. 4).
- Page 6 VI. Circuit Diagram KO: Power Switch FU: Fuse(15A/25A) SSR: Solid State Relay EH1 EH2: Heating pipe ST: Thermocouple L2: Temperature Indicator Light X1: Terminal SJ: Thermostat SA: Limit Switch KJ: Time Relay L1: Time Indicator Light HA: Buzzer - 6 -...
Need help?
Do you have a question about the SHT-20LP1 and is the answer not in the manual?
Questions and answers