Canon Inner Finisher-D1 Installation Procedure page 17

Installation Procedure > Installing the Inner Finisher in the Host Machine
18) Restore the support cover.
• 2 screws (RS tightening; M3x6, removed at step 3) of "Preparation at the Host Machine")
• 2 hooks
19) Close the toner supply cover, front cover and right cover.
Installation Procedure > Installing the Inner Finisher in the Host Machine
20) Open the ADF (or the copy board cover) and remove the reader front cover.
• 2 screws
• 1 hook
F-1-41
F-1-42
NOTE:
Push and release the hook under the reader front cover to remove it.
x2
17
F-1-43
17