Installation Procedure > Installing the Inner Finisher in the Host Machine
12) Attach the joint arm of the punch unit to the inner finisher. Joint 3 connectors of the punch
relay cable to the joint arm. Set the punch relay cable in the wire saddle.
NOTE:
Do not yet fix the joint arm with a screw..
x3
Installation Procedure > Installing the Inner Finisher in the Host Machine
13) Fix the cable cover included in the inner puncher carton together with the joint arm. Pay
attention cable wires are not caught.
• 1 screw (RS Tightening; M3x8)
CAUTION:
Firmly insert the projection of the cable cover to a positioning hole of the joint arm.
x1
F-1-35
15
F-1-36
15