Checking The Contents - Canon Inner Finisher-D1 Installation Procedure

Checking the Contents > Included Items of Inner Finisher-D1 with Inner 2/3 Hole Puncher-A1

Checking the Contents

Unpack the Inner Finisher-D1 with Inner 2/3 Hole Puncher-A1 and make sure that none of the following parts is missing.
Included Items of Inner Finisher-D1 with Inner 2/3 Hole Puncher-A1
[1]
[6]
[11]
Checking the Contents > Included Items of Inner Finisher-D1 with Inner 2/3 Hole Puncher-A1
[2] [3]
[4] [5]
[7]
[9]
[12] [13]
[15] [16]
[1] Inner Finisher
[2] Staple sheet
[3] Staple cartridge
[4] Fixing plate
[5] Eddge saddle
[6] Punch unit
[7] Tray lower cover
[8] Blindfold label (white)
[9] Finisher front cover
[10] Operation sub cover
[11] Rail unit
[12] Path guide
* [13] Motor cover (OP)
[14] Cover hinge mount
[15] Cable cover
[16] Rail support (f)
[8]
[17] Screw (RS tightening; M3x8)
* Motor cover(OP) is used only when the additional tray is
equipped with the innner fnisher.
[10]
[14]
[17]
F-1-4
4
1 pc.
1 box (3pcs.)
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
15 pcs.
T-1-1
4