Technische Daten; Safety Notes - Westfalia TMK-014 Instruction Manual

Please note the included General Safety Notes and the following
safety notes to avoid malfunctions, damage or physical injury:
Make sure the voltage corresponds to the type label on the battery
charger.
The battery charger is designed for charging the plunge saw only. Do not
charge other machines with this charger. Do not charge the battery of the
plunge saw with other charger.
Protect battery and battery charger from humidity. Do not operate the
battery charger outdoors.
When not in use and before cleaning and servicing, disconnect the battery
charger from the power supply.
Take special care of the battery. Avoid dropping it onto any hard surface
and do not subject it to pressure or any other form of mechanical stress.
Keep the battery away from extreme heat and cold.
Do not open or attempt to repair the battery or the battery charger. If any
parts are damage have them repaired by a qualified technician or contact
your customer service.
Only charge the battery at an ambient temperature between 10º C and 40º
C. A charged battery can be used to power the machine under ambient
temperature conditions between 0º C and 50º C.
When not in use, store the battery in a dry place between 10º C and 30º C.
Important Danger! Never short-circuit the battery or expose it to moisture.
Do not store it together with any metal parts which could short-circuit the
contacts. The battery could overheat, start burning or explode.
Rechargeable Batteries do not belong in
the household garbage.
For battery disposal please check with your
local council.

Safety Notes

11