Fujitsu PRIMERGY LTO3 User Manual page 66

• Drive Error LED (Amber)
LED Status
OFF
Blinking
• Tape Error LED (Amber)
LED Status
OFF
Blinking
• Clean LED (Amber)
LED Status
ON
OFF
Blinking
Emergency reset
This button resets the drive. If pressed with the tip of a clip or some other thin object the drive is
reset. This is used to forcible eject the data cartridge if it can not be ejected normally.
"2.2.3 How to use forcible ejection when the data cartridge cannot be ejected"(pg.70)
Do not use "Emergency reset" under normal circumstances. If "Emergency reset" is
pressed during operation errors will occur in the OS and backup software.
66
No errors
A hardware error has been detected.
No errors
There is a problem with the data cartridge being loaded.
The cleaning cartridge is in use.
Cleaning not required.
Cleaning required.
If this LED is on, insert a cleaning cartridge into the drive to clean it.
"4 Cleaning"(pg.74)
Device status
Device status
Device status