Table of Contents
Advertisement
ABOUT THIS MANUAL
Purpose
This manual describes the assembly, installation, operation and troubleshooting of this unit. Please read
this manual carefully before installations and operations. Keep this manual for future reference.
Scope
This manual provides safety and installation guidelines as well as information on tools and wiring.
SAFETY INSTRUCTIONS
WARNING: This chapter contains important safety and operating instructions. Read and
keep this manual for future reference.
1.
Before using the unit, read all instructions and warnings marked on the unit, the batteries and all
appropriate sections of this manual.
2.
CAUTION --To reduce risk of injury, charge it with only deep-cycle lead acid type rechargeable
batteries. It might cause burst or result in physical injury and damage if you charge it with other types
of the batteries.
3.
Do not disassemble the unit at will. For servicing or repairs, it's advised to take it to an authorized
service center. Incorrect re-assembly may result in a risk of electric shock or fire.
4.
To reduce the risk of electric shock, unplug all wirings from the wall outlet before any maintenance or
cleaning. Turning off the unit will not reduce this risk.
5.
CAUTION – Only qualified personnel can install this device with battery.
6.
NEVER charge a frozen battery.
7.
For optimum operation of this inverter, please follow required spec to select appropriate cable size. It's
very important to correctly operate this inverter.
8.
Be very cautious when working with metal tools on or around the batteries. A potential risk exists when
you drop tools on or around the batteries. Spark, short circuited batteries or other electrical parts might
cause an explosion.
9.
Please strictly follow installation procedure when you want to disconnect AC or DC terminals. Please
refer to the INSTALLATION section of this manual for the details.
10. Fuses are provided for over-current protection of the battery supply.
11. GROUNDING INSTRUCTIONS -This inverter should be connected to a permanent grounded wiring
system. Be sure to comply with local requirements and regulation to install this inverter.
12. NEVER cause AC output and DC input short circuited. Do NOT connect to the mains when DC input
short circuits.
13. Warning!! Only qualified service staffs are able to operate this device. If errors still persist after
following the troubleshooting table, please send this inverter back to the local dealer or service center
for maintenance.
1
Advertisement
Table of Contents
Need help?
Do you have a question about the SP5000 Power-M and is the answer not in the manual?