Mpxe Rear Junction Box - Parker PNEUDRI domnick hunter MAXI PLUS MPXS Series Manual

iv)

MPXE REAR JUNCTION BOX

1. Isolate the dryer electrically.
2. Make connections as shown below:-
To temperature
sensor
CONNECTION FROM BOTTOM OF
TERMINALS
1. Ready Made
2. Ready Made
3. Ready Made
4. Ready Made
5. Ready Made
6. Ready Made
7. WS Drain supply
8. AO Drain supply
9. AA Drain supply
10. Ready Made
11. Unused
12. Unused
13. Ready Made
14 Ready Made
If a DPE or drain connection is not used, leave the gland blanked off.
3. Connect at DPE's in accordance with DPE Installation Manual supplied.
4. Connect at Drain Alarm connection in accordance with Condensate Drain Installation Manual supplied.
5. Re-apply power to the dryer.
CONNECTION FROM
TERMINALS
1. Ready Made
2. Ready Made
3. DPE 1 Feedback (AO)
4. DPE 2 Feedback (AA)
5. DPE 3 Feedback (AR)
6. Unused
7. DPE 1 supply (AO)
8. DPE 2 supply (AA)
9. DPE 3 supply (AR)
10. WS Drain Feedback
11. AO Drain Feedback
12. AA Drain Feedback
13. ABV 24VAC
14 ABV Neutral
18
From controller
TOP OF