Inspection And Maintenance; Inspection - Canon CXDI-50G User Manual

5. Inspection and Maintenance

! WARNING
CAUTION
!

5.1 Inspection

In order to ensure that the instrument is used safely and normally, please be sure to inspect
the instrument before use.
If any problem is found during the inspection, please take measures indicated in this chap-
ter.
If problem still cannot be corrected, please contact Canon representative or distributor.
It is recommended that a record of the inspection by kept by making copies of the check
lists in this section, or making a separate check list.
5.1.1 Daily Inspection
5.1.1.1 Before Turning ON the Power
WARNING
!
! WARNING
Check that cables are not dam-
aged or cover of cables is not
torn.
Check that the cables are prop-
erly connected to the connectors
and the AC outlet.
Check that the cover or parts are
not damaged and not loose.
The instrument must be repaired by a qualified engineer only.
If it is not repaired properly, it may cause fire, electric shock, or accident.
For safety reasons, be sure to inspect the instrument before using it.
For safety reasons, be sure to turn OFF the power of each instru-
ment when the following inspections are going to be performed.
Otherwise, it may result in electric shock.
Clean the plug of the power cable periodically by unplugging it
from the AC outlet and removing dust or dirt from the plug, its
periphery and AC outlet with a dry cloth. If the cable is kept
plugged in for a long time in a dusty, humid or sooty place, dust
around the plug will attract moisture, and this could cause insula-
tion failure which could result in a fire.
Inspection
Result
Date Date
/ /
Good/Bad Good/Bad Good/Bad
Good/Bad Good/Bad Good/Bad
Good/Bad Good/Bad Good/Bad
– 8 –
Remedy
Date
/
Contact Canon or distrib-
utor if there is any prob-
lem.
Connect the cables prop-
erly.
Contact Canon or distrib-
utor if there is any prob-
lem.