Canon CXDI-50G User Manual page 24

5.1 Inspection
5.1.3 Yearly Inspection
Perform the following inspection periodically more than once a year. Contact Canon repre-
sentative or distributor if you cannot do it.
Check the performance of the
instrument by performing an
exposure using a phantom or
resolution chart.
5.1.4 Calibration
Perform calibration when exposure conditions have changed significantly.
See the CXDI Control Software Operation Manual for the procedure for calibration.
Inspection
Result
Date Date
/ /
Good/Bad Good/Bad Good/Bad
– 10 –
Remedy
Date
/
Contact Canon or distrib-
utor if there is any prob-
lem.