Canon CXDI-50G User Manual page 23

5.1.1.2 After Tuning ON the Power
Check that power lamp is lit.
Perform test exposure.
5.1.2 Monthly Inspection
Perform the following inspection periodically more than once a month. Contact Canon
representative or distributor if you cannot do it.
Check the performance of the
instrument by performing expo-
sures using a phantom or a res-
olution chart, or perform self-
test.
Inspection
Inspection
Result
Date Date
/ /
Good/Bad Good/Bad Good/Bad
Good/Bad Good/Bad Good/Bad
Result
Date Date
/ /
Good/Bad Good/Bad Good/Bad
– 9 –
5.1 Inspection
Remedy
Date
/
Connect the power cable
and sensor cable prop-
erly.
Take measures if error
message is displayed by
referring to the CXDI
Control Software Opera-
tion Manual. Contact
Canon or distributor if the
problem cannot be
solved.
Remedy
Date
/
Refer to the CXDI Con-
trol Software Operation
Manual for the proce-
dure for self-test. Contact
Canon or distributor if
there is any problem.