Chapter 3. Windows Nt 4.0 Installation; Drivers Available; Card And Socket Services - IBM 10/100 EtherJet CardBus Ready Port Adapter with 56K Modem Installation And Planning Manual

fhf0mstr.book Page 1 Tuesday, April 20, 1999 10:39 AM
April 20, 1999 10:20 am
Chapter 3. Windows NT 4.0
Installation
The EtherJet CardBus Ready Port Adapter with Modem supports
manual installation under Microsoft Windows NT 4.0. Plug and
Play installation and hot swapping of the EtherJet CardBus
Ready Port Adapter with Modem is not directly supported by
Windows NT.

Drivers Available

The following drivers for Windows NT can be found on the IBM
CD-ROM:
• IBMC.SYS - NDIS3 driver
• IBMCN4.SYS - NDIS4 driver
• IBMMODEM.SYS - modem enabler
The NDIS3 driver IBMC.SYS is installed by default when you use
the procedures in this chapter. For NDIS4 instructions, see the
README file on the IBM CD-ROM.
For the latest information on CardBus support in Windows NT,
review the README file on the IBM CD-ROM.

Card and Socket Services

Before installing the EtherJet CardBus Ready Port Adapter
with Modem under Windows NT 4.0, see the README file on
the IBM CD-ROM or visit the product Web site at:
http://www.networking.ibm.com/support
© Copyright IBM Corp. 1999 3-1