Connecting To A Lan - IBM 10/100 EtherJet CardBus Ready Port Adapter with 56K Modem Installation And Planning Manual

fhf0mstr.book Page 6 Tuesday, April 20, 1999 10:39 AM
April 20, 1999 10:20 am

Connecting to a LAN

To connect to a 100BASE-TX or 10BASE-T LAN, attach the
RJ-45 connector to the female receiver of the EtherJet CardBus
Ready Port Adapter with Modem as shown in Figure 1-2.
Figure 1-2. Connecting to a 100BASE-TX or 10BASE-T LAN (RJ-45)
Connecting to the Telephone Network
Follow these instructions to connect to the telephone network:
Step 1. Attach an RJ-11 connector to the female receiver of the
EtherJet CardBus Ready Port Adapter with Modem as
shown in Figure 1-3.
Figure 1-3. Connecting Modem to the Telephone Network (RJ-11)
1-6 EtherJet CardBus Ready Port Adapter with Modem
RJ-45
Do not plug an RJ-11 connector
into the RJ-45 Socket
RJ-11