IBM 10/100 EtherJet CardBus Ready Port Adapter with 56K Modem Installation And Planning Manual page 16

fhf0mstr.book Page 4 Tuesday, April 20, 1999 10:39 AM
April 20, 1999 10:20 am
For modem operations you will need:
• An analog telephone line (not provided)
• One RJ-11 modular telephone cable (supplied)
Note: You might need an RJ-11 adapter for your local
telephone system (not provided).
• Communications software is required for modem and fax
operations.
The two RJ-11 ports on the EtherJet CardBus Ready Port
Adapter with Modem are identical: use one to connect the
modem to the telephone line, use the other for an approved
telephone set.
Some countries prohibit or restrict use of two RJ-11 connections.
Inserting the EtherJet CardBus Ready
Port Adapter with Modem
Follow these instructions to insert the EtherJet CardBus Ready
Port Adapter with Modem:
1. Hold the EtherJet CardBus Ready Port Adapter with Modem
by the edges with the IBM label facing upward and the wide
PC Card connector next to the insertion slot.
2. Insert the card into the PC Card slot.
1-4 EtherJet CardBus Ready Port Adapter with Modem