Icmp Ping - TP-Link EC440-G4u User Manual

Chapter 13
3. Enable Remote Management
HTTPS connection. Keep the
4. Set the client device allowed for remote management. Select
devices to manage the router. If you just want to allow a specific device to manage
the router, select
of the remote device.
5. Click Save.
All devices or the specific device on the internet can log in to your router using the
address displayed on the
router.
Tips:
1. If you were warned about the certificate when visiting the web management page remotely, click
similar option) to continue. To avoid this warning, you can download and install the certificate on the router's web
management page at Advanced
2. The router's WAN IP is usually a dynamic IP. Please refer to
in to the router through a domain name.

13. 5. 4. ICMP Ping

ICMP (Internet Control Message Protocol) Ping is used to diagnose the network by
sending ICMP echo request packets to the target remote or local host and waiting for
an ICMP response.
You can control the router's replies to ICMP Ping requests.
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
and Remote Management via HTTPS
Port as the default setting.
Only the Following IP/MAC Address
Manage This Router via the Address
> System Tools > Administration.
and enter the IP/MAC address
Set Up a Dynamic DNS Service Account
Manage Your Router
to allow for
All to allow all remote
field to manage the
Trust (or a
if you want to log
84