Configure Ipv6 Lan Settings; Configure The Radvd Address Type - TP-Link EC440-G4u User Manual

Chapter 12
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced
3. Scroll down to locate the
address reservation entry for your device.
4. Enter the MAC Address
5. Specify the IP address which will be reserved by the router.
6. Check to Enable This Entry

12. 2. Configure IPv6 LAN Settings

Based on the IPv6 protocol, the router provides two ways to assign IPv6 LAN addresses:
• Configure the RADVD (Router Advertisement Daemon) address type
• Configure the DHCPv6 Server address type

12. 2. 1. Configure the RADVD Address Type

1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced
3. Select IPv6 to configure IPv6 LAN parameters.
> Network > LAN Settings
Address Reservation
of the device for which you want to reserve IP address.
and click
> Network > LAN Settings.
Customize Your Network Settings
page and select IPv4.
section and click
OK to make the settings effective.
Add to add an
63