Http Referer Head Check; Icmp Ping - TP-Link EC330-G5u User Manual

Chapter 12
Tips:
1. If you are warned about the certificate when visiting the web management page remotely, click
option) to continue. To avoid this warning, you can download and install the certificate on the router's web management
page at Advanced > System Tools
2. The router's WAN IP is usually a dynamic IP. Please refer to
in to the router through a domain name.

12. 7. 4. HTTP Referer Head Check

HTTP referer header check function can protect your networks against CSRF attacks.
This function is enabled by default. You can disable this function if needed.
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced
Head Check section.
3. Clear the Enable

12. 7. 5. ICMP Ping

ICMP (Internet Control Message Protocol) Ping is used to diagnose the network by
sending ICMP echo request packets to the target remote or local host and waiting for
an ICMP response.
You can control the router's replies to ICMP Ping requests.
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced
3. Specify the ICMP Ping reply options.
> Administration.
> System Tools > Administration, and locate the
check box and click
> System Tools > Administration, and locate the
Set Up a Dynamic DNS Service Account
Save if you want to disable this function.
Manage Your Router
Trust (or a similar
if you want to log
HTTP Referer
ICMP Ping section.
96