View Wireless Information - TP-Link EC440-G4u User Manual

Chapter 12
Note: When 802.11n only mode is selected, only 802.11n wireless stations can connect to the router. It is strongly
recommended that you select 802.11bgn mixed, and all of 802.11b, 802.11g, and 802.11n wireless stations can connect
to the router.
• 802.11ac only (5GHz): Select only if all of your wireless clients are 802.11ac devices.
• 802.11ac/n mixed (5GHz): Select if you are using both 802.11ac and 802.11n wireless
clients.
• 802.11a/n/ac mixed (5GHz): Select if you are using a mix of 802.11a, 802.11n and
802.11ac wireless clients. It is strongly recommended that you select 11a/n/ac mixed.
Channel: Select the channel you want to use from the drop-down list. This field
determines which operating frequency will be used. It is not necessary to change the
wireless channel unless you notice interference problems with another nearby access
point.
Channel Width: Select the channel width from the drop-down list. The default setting is
Auto, which can adjust the channel width for your clients automatically.
Transmit Power: Select Low, Middle, or High to specify the data transmit power. The
default and recommended setting is High.
To change the security option:
1. Go to Advanced >
2. Select the wireless network
3. Select an option from the
the default settings unless necessary. If you select other options, configure the
related parameters according to the help page.

12. 6. 2. View Wireless Information

To view the detailed wireless network settings:
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced
3. Click 2.4GHz or
Wireless > Wireless
2.4GHz or 5GHz.
Security drop-down list. We recommend you don't change
> Status page. You will find the
5GHz to view the wireless details.
Customize Your Network Settings
Settings.
Wireless panel.
72