TP-Link EC440-G4u User Manual page 12

Chapter 2
Note: If the 2.4G LED and 5G LED are off, please press the WiFi button for 2 seconds and check the LEDs again a few
seconds later.
6. Connect your computer to the router.
• Method 1: Wired
Turn off the Wi-Fi on your computer and connect the devices as shown below.
LAN Ports
• Method 2: Wireless
1 ) Find the SSID (Network Name) and Wireless Password printed on the label at
the bottom of the router.
2 ) Click the network icon of your computer or go to Wi-Fi Settings of your smart
device, and then select the SSID to join the network.
Computer
Connections are available
Wireless Network Connection
TP-Link_2.4G_XXXX
TP-Link_5G_XXXX
Connect automatically
• Method 3: Use the WPS button
Wireless devices that support WPS, including Android phones, tablets, most USB
network cards, can be connected to your router through this method.
Note:
• WPS is not supported by iOS devices.
Power
2.4G
On
On
Ethernet cable
OR
Connect
Internet
5G
On
On
Smart Device
< Settings Wi-Fi
Wi-Fi
CHOOSE A NETWORK...
TP-Link_2.4G_XXXX
TP-Link_5G_XXXX
Other...
Connect the Hardware
8