Table of Contents
Advertisement
Chapter 17
All devices or the specific device on the internet can log in to your router using the
address displayed on the
router.
Tips:
1. If you were warned about the certificate when visiting the web management page remotely, click
similar option) to continue. To avoid this warning, you can download and install the certificate on the router's web
management page at
Advanced
2. The router's WAN IP is usually a dynamic IP. Please refer to
in to the router through a domain name.
18 7 4
HTTP Referer Head Check
HTTP referer header check function can protect your networks against CSRF attacks.
This function is enabled by default. You can disable this function if needed.
1
Visit
http://tplinkmodem.net
set for the GPON router.
2
Go to
Advanced
Head Check
section.
3
Clear the
Enable
18 7 5
ICMP Ping
ICMP (Internet Control Message Protocol) Ping is used to diagnose the network by
sending ICMP echo request packets to the target remote or local host and waiting for
an ICMP response.
You can control the router's replies to ICMP Ping requests.
1
Visit
http://tplinkmodem.net
set for the GPON router.
2
Go to
Advanced
Manage This Router via the Address
>
System Tools
> Administration.
or http://192.168.1.1, and log in with the password you
>
System Tools
> Administration, and locate the
check box and click
or http://192.168.1.1, and log in with the password you
>
System Tools
> Administration, and locate the
Set Up a Dynamic DNS Service Account
Save
if you want to disable this function.
Manage Your GPON Router
field to manage the
Trust
if you want to log
HTTP Referer
ICMP Ping
section.
(or a
156
Advertisement
Table of Contents
