Checking The Box Contents; Included Parts - Harmar Mobility SL600 HD Installation & Service Manual

CHECKING THE BOX
CONTENTS
Before installing the lift, review each part against the
packaging checklist to ensure that all parts have been
included. If any parts are missing or damaged, immediately
contact the dealer who sold the lift. DO NOT attempt to
install or use a lift that has missing or damaged parts.

INCLUDED PARTS

• Chassis Box:
• Chassis
• Call/Send Parts
• 2 Call/Send Hand Controls
• Battery Charger
• Installation Manual
• Owner's Manual
• Rail Bracket Box:
• Rail Brackets (2, 3, 4, or 6 per set)
• Wood Screws (#14 x 2" (4 per rail bracket)
• Chair Box:
• Chair
• Back Rest
• Seat Belt
• Footrest Box:
• Footrest complete with Swivel Slide Rails
and Swivel Pin Bracket
• Rear Seat Support
HEAVY DUTY STAIR LIFT: SECTION 3
• Rail Box:
• Bottom Rail Pre-installation with Bottom
• Bottom Limit Cam
• Joint Pins and Joint Brackets (two-piece rail
• Plastic Gear Rack
• Top Rail Pre-installed with Charge Strip
• Rail Accessories (Plastic Bag) with Top End
• Self-cutting screws ( 1/4" - 20 x 1")
• Torx T30 Driver Bit
• Rail Parts (Plastic Bag) with Extra Plastic
SL600HD Heavy Duty Stair Lift:
PREPARATION
End Plate and Charge Strip Wire Harness
only)
Wire Harness
Plate and Compression Bolts (2 sizes)
Racks (2 or 3) and Top Limit Cam
Installation & Service Manual
31JAN2020 | P/N: 75403 REV C
7