Table of Contents
Advertisement
MAINTENANCE
Clean the Filter Screen
If the flushing volume reclines sharply after
installation or used for a long time with no cause
from water pressure, the filter may need a wash.
Turn off the fixed cap with filter-key,
take out the filter, clean with a brush and reinstall it.
Notice:
a. Turn off the water supply or tighten the
adjusting bolt before cleaning.
b. Carefully take out the filter when cleaning to
avoid foreign materials entering the inside
of the valve body.
a.
b.
Care & Clean
Keep the sensing window clean.Wipe with soft cloth
and mild cleaner.
Notice:
a. Do not use dust-removing powder, abrasive
powder or cleaner containing oil, acidor
alkaline ingredient.
b. Do not spray air-refresher, disinfector, or
other deodorizing,cleaning solvent directly
into the sensing window.
c. Keep wire away from water.
d. Don t attack the sensor window.
ONE-YEAR WARRANTY
ONE-YEAR WARRANTY
* Our company has an extensive quality promise to the
end customers. The karat products proven to be
correctly installed and properly used enjoy a mainten
ance period of 1 year during which any products with
quality defects shall be repaired without any charge.
* Quality defects caused by the following factors are
not included in the promise:
1) Quality defects caused by improper installation,
replacing and repairing are not included in the promise.
2) Products of industrial and commercial use are not in
cluded in the promise.
However the end customers are included.
3) Quality defects caused by misuse, abuse, careless
ness and employment of
non-Karat components are not included in the promise.
* Please keep your invoice of the Karat product properly
to ensure better service from us.
* This promise base on the produced since 2007 of our
company in China.
* The company keep its right of use the latest compon
ent for repairing.
a.
b.
c.
d.
*
*
*
*
*
Filter
2007
Advertisement
Table of Contents
