NOTE:
If you do not hear the click, remove the memory module and reinstall it.
Next steps
1. Install the
battery
cable.
2. Install the
base
cover.
3. Follow the procedure in
Solid state drive
Removing the M.2 2230 solid-state drive
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
battery
cable.
About this task
The figure indicates the location of the M.2 2230 solid-state drive and provides a visual representation of the removal procedure.
Steps
1. Remove the single (M2x3) screw that secures the solid-state module to the palmrest assembly.
2. Slide the solid-state module out from the M.2 slot.
Replacing the SSD support bracket
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
battery
cable.
4. Remove the
M.2 2230
SSD.
32
Disassembly and reassembly
After working inside your
computer.
Before working inside your
Before working inside your
computer.
computer.