Dell Latitude 3310 Service Manual page 57

Steps
1. Locate the system board slot on your computer.
2. Slide the ports on the system board into the slots on the palm-rest and keyboard assembly and align the screw holes on the system
board with the screw holes on the palm-rest and keyboard assembly.
3. Install the two (M2x2) screws that secure the system board to the palmrest and keyboard assembly.
4. Replace the two (M2x5) screw to secure the metal bracket to the computer.
5. Connect the coin-cell cable to the latch.
6. Connect the I/O board cable, keyboard transfer cable, and touchpad cable to the latch.
7. Route the cable, install the wireless cable, and connect the system fan cable to the connector on the system board.
8. Affix back the adhesive tape and connect the touchscreen cable to the latch. Replace the ED cable and connect the display cable to
the latch on the system board.
9. Affix back the adhesive tape and connect the world-facing camera cable to the latch.
10. Replace the three (M2.5x5) screws to fix the hinge.
11. Replace the single (M2x3) screw to fix the metal bracket.
Next steps
1. Install the Heatsink.
2. Install the WLAN card.
3. Install the Solid state drive.
4. Install the memory.
5. Install the battery.
6. Install the base cover.
7. Follow the procedure in After working inside your computer.
Disassembly and reassembly 57