Installing The Touchpad - Dell Latitude 3310 Service Manual

Steps
1. Locate the touchpad on your computer.
2. Open the latch and disconnect the keyboard transfer cable from the system board.
3. Open the latch and disconnect the touchpad cable from the connector.
4. Peel off the transparent adhesive tapes.
5. Remove the three (M2x2) screws that secure the touchpad bracket and lift the bracket from the palmrest.
6. Peel off the adhesive tapes.
7. Remove the three (M2x2) screws that secure the touchpad.
8. Lift the touchpad from the system board.

Installing the touchpad

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the battery and provides a visual representation of the installation procedure.
Disassembly and reassembly 51