Installing The Heatsink Assembly; System Fan; Removing The System Fan - Dell Latitude 3310 Service Manual

Installing the heatsink assembly

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the heatsink and provides a visual representation of the installation procedure.
Steps
1. Locate the heatsink slot on your computer.
2. Align and place the heatsink assembly into the slot of your computer.
NOTE: Ensure to apply the thermal grease to the heatsink assembly.
3. Install the four (M2x3) screw that secures the heatsink assembly.
Next steps
1. Install the battery.
2. Install the base cover.
3. Follow the procedure in

System Fan

Removing the system fan

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the battery cable.
4. Remove the WLAN card.
After working inside your computer.
Before working inside your computer.
Disassembly and reassembly 41