Page 2
1x SIM card that is preactivated and inserted in the camera 1x USB Micro USB cable 1x LIT-10 lithium battery pack NOTE: MicroSD memory card is sold separately. User manual, latest firmware, and FAQ available at: support.spypoint.com Components Solar panel SIM card slot Slot for installation strap Antenna...
Getting started CHARGING THE LITHIUM BATTERY • Remove the lithium battery pack from the camera. • Using the Micro USB cable, recharge the battery pack for about 12 hours. • Once the lithium pack is fully charged, the red light will turn green. Do not insert AA batteries into the lithium battery compartment, as this could damage the camera.
Page 5
• The card is inserted correctly when a click is heard. LIT-10 BATTERY SPECIFICATIONS This lithium battery is compatible with all SPYPOINT LINK-MICRO cameras and the CELL-LINK. Charging time ≈ 12 hours (with USB cable) Operating temperature (-30 °C to+50 °C) (-22 °F to+122 °F)
Page 6
, search for "SPYPOINT app. " Download and install the app on your smartphone or tablet. Start the app. Select "ACTIVATE A DEVICE." In the list, select "LINK-MICRO-S-LTE" then follow the steps. When complete, a confirmation email will be sent to you with a generated password.
Page 7
On the SPYPOINT.COM website, select "MY ACCOUNT" in the top navigation menu. On the displayed page, select "Register, " fill out the required fields, then log in. Select the + sign on the far right of the page; in the list, select "LINK-MICRO-S-LTE" then follow the steps.
CONFIGURING YOUR CAMERA Both the SPYPOINT app and website let you configure all the camera settings remotely. They also provide basic information on your camera – such as: cellular signal strength, battery level, and MicroSD card space used. This information is based upon the latest connection with your camera.
STARTING YOUR CAMERA FIRST TIME SETUP Turn on the camera. The green "STATUS" light will flash while searching for a signal (can take a few minutes). The "STATUS" light will light up in one of the following 3 colors: Red: Insufficient signal.
DISPOSAL ONLY USE ORIGINAL SPARE PARTS AND ACCESSORIES. If one day your camera has been used so intensively that it has to be replaced, or if you no longer have any use for it, you are obliged to dispose of it at a recycling center. Information on return points for your electrical appliance can be obtained from your local waste disposal company or from your local administrative offices.
Page 11
This device must not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. THANK YOU FOR CHOOSING FAQ, user manual & latest firmware available at: SUPPORT.SPYPOINT.COM Live chat support at service@spypoint.com www.spypoint.com Join the community Sit back and relax as this device is covered by the “Know you’re...
Need help?
Do you have a question about the LINK-MICRO-S-LTE and is the answer not in the manual?
Questions and answers
Hallo ich benötige einen Akku und Ladegerät. Wir kann ich das erhalten bzw. kaufen?