Faber e-MatriX 800-500 I User Manual page 10

User manual e-MatriX heat
Code Symptom
Remote is not working.
Large amount of smoke
appears grey or colourless.
57 e-MatriX will not operate,
the LED's continuously to
blink three times.
58 e-MatriX will not operate,
the LED's continuously to
blink once every eight
seconds.
9 < < < <
Cause
Low batteries.
Remote isn't paired to
receiver.
Distance to fire is too far.
Lamp failure.
Water leak
Water level too high.
Action
Place new batteries, see chapter 5.
Pair the remote control with the receiver, see
chapter 5.
Shortens the distance.
Call for maintenance.
Switch the mains switch of the Control box to
the "OFF" (0) position, see fig. 4.0-D. Check all
connections on water leakage and
mains switch back in the "ON" position.
Switch the mains switch of the Control box to
the "OFF" (0) position, see fig. 4.0-D and call
for maintenance.
turn the